225+ Electricians, Engineers and Energy professionals
trust and use our products.
ATP01 – Output integrator – Three phase – 1A
R 1 500.00
Use Rogowski Coils as normal Current transformers with this Integrator. It amplifies the signal from the Rogowski coil to be the same as a 1 A current transformer (CT). The ATP01 is a DIN-RAIL mounted, 1A Output Rogowski coil integrator. It is powered directly from the mains power supply. The ATP01 can be combined with any model and size of MRC and NRC Range Rogowski coils. The ATP01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc. Flexible Rogowski coils are a good solution for current measurement and can be used in a number of cases where traditional current transformers is not the adequate solution.
| Size | 1A, 5A |
|---|
Sold Out – Get notified when it is back in Stock.
Would you like to be notified when this item is back in stock? Then please complete the form below:
Features of the ATP01:
The ATP01 is a DIN-RAIL 1A Output Rogowski coil integrator. It is installed in a distribution box, in a plastic 1 module DIN-RAIL enclosure, and powered directly from the mains.
The ATP01 can be combined with any model and size of Y-FCT or FCT Rogowski coils. The available values are: 0-1A AC.
ATP01 and Rogowski coil is a very flexible system, suitable for high power load analysis, impulsive current monitoring, DC ripple measurement, etc.
Due to its specific features, the flexible Rogowski coil is an excellent solution for current measurement and can be used in a number of cases where the traditional current transducer is not an adequate solution.
What does the ATP01 integrator do?
Rogowski coil output is a weak voltage mV signal, the ATP01 can amplify and convert it to a standard signal which can be captured by multimeter and scope.
Rogowski coil output is proportional to the frequency of the measured current, the signal equalization ensures a linear response on a wide frequency range.
ATP01 allows the use of coils on different electrical network frequencies, keeping the same output level over the frequencies.
An integrator is essential to equalize and shift the output signal from the Rogowski coils by 90°.
It consists of an active electronic circuit with negligible offset and a good linearity.
Advantages:
- High read accuracy 0.5%
- Compact DIN-RAIL construction
- High bandwidth for measurement 30 to 5kHz
- Output 1A rms
Applications:
- Measuring devices, lab instrumentation
- Power monitoring & analysis
- Harmonics and transients monitoring
- Welding machine control
- High current measurement
Specifications of ATP01 integrator:
| Model | ATP01 |
| Rated output | 1A AC rms |
| Maximum Output(overload) | 1.5A AC rms |
| Rated ratio | 100A 600A 1000A 3000A 6000A |
| Read Accuracy | 0.5% typical at 1%(≥10A) to 110%of rated Current @25℃ |
| Phase error | ≤0.5° |
| Linearity | ±0.2% of reading(10% to 120% of range) |
| Bandwidth | 30Hz to 5kHz |
| Maximum Burden | 0.5Ω |
| Measurement | Secondary CTs to measure output of integrator |
| Power consumption | 5W |
| Output on 0A （zero drift） | ≤0.01A |
| Temperature drift | 200ppm/℃ |
| Weight | 320g |
| Dimension | 114*100*22.5mm |
| Power supply | 12V DC |
| Operating temperature | -20℃ to 70℃ |
| Storage temperature | -30℃ to 90℃ |
| Relative humidity | 80% max.without condensation |
| Protection degree | IP20 |
Only logged in customers who have purchased this product may write a review.
Related products
-
R 1 800.00 -
R 2 900.00
-
R 190.00
-
R 1 800.00
Reviews
There are no reviews yet.